GM Line
MAPLUS GM Base Cold
From
€49.90*
Fluor free solid base for racing. Use for all type of snow, new and transformed, artificial and natural, with snow temperature from -22°C to -8°C. Performancing use with air humidity between 30% and 80%. Use hot application with the waxing iron at 150°C. With GM Base Gel, it’s the best choice as a base to overlap GM Boost Powder or Liquid.
HOW TO USE
HOT APPLICATION WITH WAXING IRON1. Let the
wax block drop on 20 cm of the ski base putting it in contact with the waxing
iron base at the recommended
temperature
for each kind of product and melt the wax immediately spreading it with a
regular backward and forward
movement
(from tip to tail);
2. Repeat
the same procedure on all the ski base, then carry out a final passage from the
tip to the tail (nearly 4/5 cm per
second for
GM Base Cold and Med, nearly 3 cm per second for GM BASE Hot);
3. (mix
with hardener) If snow conditions should require a harder base, over the GM
BASE layer just hardened, place some
ARTIC BASE
powder (higher will be the snow abrasion, bigger will be the quantity of
powder) and carry out a slow passage (nearly 3 cm per second) with the waxing iron at 150°C. melting perfectly
the powder inside the solid wax;
4. Free the
ski & edge side from the hardened wax with a plexy scraper;
5. Wait at
least 15 minutes for the ski wax to harden and the ski base to cool down, then
remove the wax in excess with a
sharpened
plexy scraper with gentle pressure;
6. Free the
ski base structure with manual hard steel brush;
7. Brush
the ski base with manual or roto hard brass brush;
8. Brush
the ski base with manual or roto hard horsehair brush;
9. Polish
the ski base with manual or roto soft nylon brush.
Content: 50 g (€998.00* / 1 kg )
MAPLUS GM Base Hot
€49.90*
Fluor free solid base for racing. Use for moist, polished and/or icy compact and mixed artificial snow, with snow temperature from -3°C to 0°C. Performancing use with air humidity between 50% and 100%. Use hot application with the waxing iron at 140°C. With GM Base Gel, it’s the best choice as a base to overlap GM Boost Powder or Liquid.HOW TO
USE HOT APPLICATION WITH WAXING IRON
1. Let the
wax block drop on 20 cm of the ski base putting it in contact with the waxing
iron base at the recommended
temperature
for each kind of product and melt the wax immediately spreading it with a
regular backward and forward
movement
(from tip to tail);
2. Repeat
the same procedure on all the ski base, then carry out a final passage from the
tip to the tail (nearly 4/5 cm per
second for
GM Base Cold and Med, nearly 3 cm per second for GM BASE Hot);
3. (mix
with hardener) If snow conditions should require a harder base, over the GM
BASE layer just hardened, place some
ARTIC BASE
powder (higher will be the snow abrasion, bigger will be the quantity of
powder) and carry out a slow passage
(nearly 3 cm per second) with the waxing iron at 150°C. melting perfectly
the powder inside the solid wax;
4. Free the
ski & edge side from the hardened wax with a plexy scraper;
5. Wait at
least 15 minutes for the ski wax to harden and the ski base to cool down, then
remove the wax in excess with a
sharpened
plexy scraper with gentle pressure;
6. Free the
ski base structure with manual hard steel brush;
7. Brush
the ski base with manual or roto hard brass brush;
8. Brush
the ski base with manual or roto hard horsehair brush;
9. Polish
the ski base with manual or roto soft nylon brush.
Content: 50 g (€998.00* / 1 kg )
MAPLUS GM Base Med
€49.90*
Fluor free solid base for racing. Use for all type of snow, new and transformed, artificial and natural, with snow temperature from -9°C to -2°C. Performancing use with air humidity between 40% and 90%. Use hot application with the waxing iron at 150°C. With GM Base Gel, it’s the best choice as a base to overlap GM Boost Powder or Liquid.HOW TO
USE HOT APPLICATION WITH WAXING IRON
1. Let the
wax block drop on 20 cm of the ski base putting it in contact with the waxing
iron base at the recommended
temperature
for each kind of product and melt the wax immediately spreading it with a
regular backward and forward
movement
(from tip to tail);
2. Repeat
the same procedure on all the ski base, then carry out a final passage from the
tip to the tail (nearly 4/5 cm per
second for
GM Base Cold and Med, nearly 3 cm per second for GM BASE Hot);
3. (mix
with hardener) If snow conditions should require a harder base, over the GM
BASE layer just hardened, place some
ARTIC BASE
powder (higher will be the snow abrasion, bigger will be the quantity of
powder) and carry out a slow passage (nearly 3 cm per second) with the waxing iron at 150°C. melting perfectly
the powder inside the solid wax;
4. Free the
ski & edge side from the hardened wax with a plexy scraper;
5. Wait at
least 15 minutes for the ski wax to harden and the ski base to cool down, then
remove the wax in excess with a
sharpened
plexy scraper with gentle pressure;
6. Free the
ski base structure with manual hard steel brush;
7. Brush
the ski base with manual or roto hard brass brush;
8. Brush
the ski base with manual or roto hard horsehair brush;
9. Polish
the ski base with manual or roto soft nylon brush.
Content: 50 g (€998.00* / 1 kg )
MAPLUS GM Base Gel Cold
From
€39.00*
Fluor free gel base for racing. Use for all type of snow, new and transformed, artificial and natural, with snow temperature from -22°C to -8°C. Performancing use with air humidity between 30% and 80%. Recommended cold application with felt pad. Specially developed for all skis that require minimal heating. With GM Base solid, it’s the best choice as a base to overlap GM Boost Powder or Liquid.COLD
APPLICATION WITH MANUAL FELT
1. Drip the
ski wax, spread it with a felt pad to cover all the ski base (useful the pad
MTO118);
2. Allow
the still liquid wax to penetrate into the spreaded area with rubbing and
pressing action with the pad and repeat the same procedure on the whole ski
base;
3. Wait
five minutes for the ski wax to harden;
4. Free the
ski & edge side from the hardened wax with a plexy scraper;
5. Brush
the ski base with forward and backward movements pressing with a manual hard
nylon brush;
6. Brush
the ski base with a hard horsehair manual or roto brush;
7. Polish
the ski base with a manual or soft nylon roto brush;
8. For a
final touch, polish the ski base with 12 mm merino wool roller.
Content: 75 ml (€520.00* / 1 l )
MAPLUS GM Base Gel Hot
€140.00*
Fluor free gel base for racing. Use for all type of snow, new and transformed, artificial and natural, with snow temperature from -3°C to 0°C. Performancing use with air humidity between 50% and 100%. Recommended cold application with felt pad. Specially developed for all skis that require minimal heating. With GM Base solid, it’s the best choice as a base to overlap GM Boost Powder or Liquid.
COLD
APPLICATION WITH MANUAL FELT
1. Drip the
ski wax, spread it with a felt pad to cover all the ski base (useful the pad
MTO118);
2. Allow
the still liquid wax to penetrate into the spreaded area with rubbing and
pressing action with the pad and repeat the same procedure on the whole ski
base;
3. Wait
five minutes for the ski wax to harden;
4. Free the
ski & edge side from the hardened wax with a plexy scraper;
5. Brush
the ski base with forward and backward movements pressing with a manual hard
nylon brush;
6. Brush
the ski base with a hard horsehair manual or roto brush;
7. Polish
the ski base with a manual or soft nylon roto brush;
8. For a
final touch, polish the ski base with 12 mm merino wool roller.
Variants from €39.00*
MAPLUS GM Base Gel Med
€140.00*
Fluor free gel base for racing. Use for all type of snow, new and transformed, artificial and natural, with snow temperature from -9°C to -2°C. Performancing use with air humidity between 40% and 90%. Recommended cold application with felt pad. Specially developed for all skis that require minimal heating. With GM Base solid, it’s the best choice as a base to overlap GM Boost Powder or Liquid.
COLD
APPLICATION WITH MANUAL FELT
1. Drip the
ski wax, spread it with a felt pad to cover all the ski base (useful the pad
MTO118);
2. Allow
the still liquid wax to penetrate into the spreaded area with rubbing and
pressing action with the pad and repeat the same procedure on the whole ski
base;
3. Wait
five minutes for the ski wax to harden;
4. Free the
ski & edge side from the hardened wax with a plexy scraper;
5. Brush
the ski base with forward and backward movements pressing with a manual hard
nylon brush;
6. Brush
the ski base with a hard horsehair manual or roto brush;
7. Polish
the ski base with a manual or soft nylon roto brush;
8. For a
final touch, polish the ski base with 12 mm merino wool roller.
Content: 500 ml (€280.00* / 1 l )
Variants from €39.00*
New
MAPLUS GM Block Perfomance Cold
€145.00*
Special wax without fluorine for cold preparation of racing skis. Used by several World Cup teams in all disciplines. Quick preparation, no heating with an iron or reworking by removing excess material required. Used with a special merino wool roller, which is soaked in the product, then rolled over the ski base 6 to 9 times. The final polishing is also done with clean merino wool.
Snow temperature: -7° / -14°C
For all types of snow
Air Humidity: 35% - 80%
Content: 20 g (€7,250.00* / 1 kg )
New
MAPLUS GM Block Perfomance Med
€145.00*
Special wax without fluorine for cold preparation of racing skis. Used by several World Cup teams in all disciplines. Quick preparation, no heating with an iron or reworking by removing excess material required. Used with a special merino wool roller, which is soaked in the product, then rolled over the ski base 6 to 9 times. The final polishing is also done with clean merino wool.
Snow temperature: -4° / -10°CFor all types of snowAir Humidity: 50% - 95%
Content: 20 g (€7,250.00* / 1 kg )
New
MAPLUS GM Block Performance Hot
€145.00*
Special wax without fluorine for cold preparation of racing skis. Used by several World Cup teams in all disciplines. Quick preparation, no heating with an iron or reworking by removing excess material required. Used with a special merino wool roller, which is soaked in the product, then rolled over the ski base 6 to 9 times. The final polishing is also done with clean merino wool.
Snow temperature: 0° / -3°C
For old, new and wet snow
Air Humidity: 60% - 95%
Content: 20 g (€7,250.00* / 1 kg )
MAPLUS GM Boost Liquid Cold
€109.90*
Fluor free liquid boost for racing. Use for all type of snow, new and transformed, artificial and natural, with snow temperature from -22°C to -8°C. Performancing use with air humidity between 50% and 80%. Recommended cold application with manual felt. Always overlap GM BOOST liquid on GM BASE Solid or Gel.
COLD
APPLICATION WITH MANUAL FELT
1. Drip the
ski wax, spread it with a felt pad to cover all the ski base (useful the pad
MTO118);
2. Allow
the still liquid wax to penetrate into the spreaded area with rubbing and
pressing action with the pad and repeat the same procedure on the whole ski
base;
3. Wait
five minutes for the ski wax to harden;
4. Free the
ski & edge side from the hardened wax with a plexy scraper;
5. Brush
the ski base with forward and backward movements pressing with a manual hard
nylon brush;
6. Brush
the ski base with a hard horsehair manual or roto brush;
7. Polish
the ski base with a soft manual or nylon roto brush;
8. For a
final touch, polish the ski base with 12 mm merino wool roller.
GM Boost Liquid must be always overlapped on GM Base Solid or Gel.
Content: 75 ml (€1,465.33* / 1 l )
MAPLUS GM Boost Liquid Hot
€119.90*
Fluor free liquid boost for racing. Use for moist, polished and/or icy compact and mixed artificial snow with snow temperature from -3°C to 0°C. Performancing use with air humidity between 60% and 100%. Recommended cold application with manual felt. Always overlap GM BOOST liquid on GM BASE Solid or Gel.
COLD
APPLICATION WITH MANUAL FELT
1. Drip the
ski wax, spread it with a felt pad to cover all the ski base (useful the pad
MTO118);
2. Allow
the still liquid wax to penetrate into the spreaded area with rubbing and
pressing action with the pad and repeat the same procedure on the whole ski
base;
3. Wait
five minutes for the ski wax to harden;
4. Free the
ski & edge side from the hardened wax with a plexy scraper;
5. Brush
the ski base with forward and backward movements pressing with a manual hard
nylon brush;
6. Brush
the ski base with a hard horsehair manual or roto brush;
7. Polish
the ski base with a soft manual or nylon roto brush;
8. For a
final touch, polish the ski base with 12 mm merino wool roller.
GM Boost Liquid must be always overlapped on GM Base Solid or Gel.
Content: 75 ml (€1,598.67* / 1 l )
MAPLUS GM Boost Liquid Med
€119.90*
Fluor free liquid boost for racing. Use for all type of snow, new and transformed, artificial and natural, with snow temperature from -9°C to -2°C. Performancing use with air humidity between 50% and 90%. Recommended cold application with manual felt. Always overlap GM BOOST liquid on GM BASE Solid or Gel.
COLD
APPLICATION WITH MANUAL FELT
1. Drip the
ski wax, spread it with a felt pad to cover all the ski base (useful the pad
MTO118);
2. Allow
the still liquid wax to penetrate into the spreaded area with rubbing and
pressing action with the pad and repeat the same procedure on the whole ski
base;
3. Wait
five minutes for the ski wax to harden;
4. Free the
ski & edge side from the hardened wax with a plexy scraper;
5. Brush
the ski base with forward and backward movements pressing with a manual hard
nylon brush;
6. Brush
the ski base with a hard horsehair manual or roto brush;
7. Polish
the ski base with a soft manual or nylon roto brush;
8. For a
final touch, polish the ski base with 12 mm merino wool roller.
GM Boost Liquid must be always overlapped on GM Base Solid or Gel.
Content: 75 ml (€1,598.67* / 1 l )
MAPLUS GM Boost Powder Cold
€109.90*
Fluor free powder boost for racing. Use for all type of snow, new and transformed, artificial and natural, with snow temperature from -22°C to -8°C. Performancing use with air humidity between 50% and 80%. Use hot application with the waxing iron at 160°C. It’s recommended to overlap GM BOOST on GM BASE Solid or Gel.
1. Spread powder wax evenly on the ski base;2. Melt the wax passing the waxing iron from the tip to the tail at recommended temperature of 160°C; move the iron at a constant speed (nearly 3 cm per second);3. Wait at least few minutes for the ski wax to harden and the ski base to cool down;4. If necessary, remove the excess of melted wax with a sharpened plexy scraper with gentle pressure;5. Free the ski base structure with manual soft brass brush;6. Brush the ski base with manual or roto hard horsehair brush;7. Brush the ski base with manual or roto soft nylon brush;8. Polish the ski base with 12 mm merino wool roller.
Content: 25 g (€4,396.00* / 1 kg )
New
MAPLUS GM Boost Powder Cold with Molybdenum
€109.90*
Fluor free powder boost for racing. Use for all type of snow, new and transformed, artificial and natural, with snow temperature from -22°C to -8°C. Performancing use with air humidity between 50% and 80%. Use hot application with the waxing iron at 160°C. It’s recommended to overlap GM BOOST on GM BASE Solid or Gel.
1. Spread powder wax evenly on the ski base;2. Melt the wax passing the waxing iron from the tip to the tail at recommended temperature of 160°C; move the iron at a constant speed (nearly 3 cm per second);3. Wait at least few minutes for the ski wax to harden and the ski base to cool down;4. If necessary, remove the excess of melted wax with a sharpened plexy scraper with gentle pressure;5. Free the ski base structure with manual soft brass brush;6. Brush the ski base with manual or roto hard horsehair brush;7. Brush the ski base with manual or roto soft nylon brush;8. Polish the ski base with 12 mm merino wool roller.
Content: 25 g (€4,396.00* / 1 kg )
MAPLUS GM Boost Powder Hot
€109.90*
Fluor free powder boost for racing. Use for moist, polished and/or icy compact and mixed artificial snow with snow temperature from -3°C to 0°C. Performancing use with air humidity between 60% and 100%. Use hot application with the waxing iron at 160°C. It’s recommended to overlap GM BOOST on GM BASE Solid or Gel.
1. Spread powder wax evenly on the ski base;2. Melt the wax passing the waxing iron from the tip to the tail at recommended temperature of 160°C; move the iron at a constant speed (nearly 3 cm per second);3. Wait at least few minutes for the ski wax to harden and the ski base to cool down;4. If necessary, remove the excess of melted wax with a sharpened plexy scraper with gentle pressure;5. Free the ski base structure with manual soft brass brush;6. Brush the ski base with manual or roto hard horsehair brush;7. Brush the ski base with manual or roto soft nylon brush;8. Polish the ski base with 12 mm merino wool roller.
Content: 25 g (€4,396.00* / 1 kg )
New
MAPLUS GM Boost Powder Hot with Molybdenum
€109.90*
Fluor free powder boost for racing. Use for moist, polished and/or icy compact and mixed artificial snow with snow temperature from -3°C to 0°C. Performancing use with air humidity between 60% and 100%. Use hot application with the waxing iron at 160°C. It’s recommended to overlap GM BOOST on GM BASE Solid or Gel.
1. Spread powder wax evenly on the ski base;2. Melt the wax passing the waxing iron from the tip to the tail at recommended temperature of 160°C; move the iron at a constant speed (nearly 3 cm per second);3. Wait at least few minutes for the ski wax to harden and the ski base to cool down;4. If necessary, remove the excess of melted wax with a sharpened plexy scraper with gentle pressure;5. Free the ski base structure with manual soft brass brush;6. Brush the ski base with manual or roto hard horsehair brush;7. Brush the ski base with manual or roto soft nylon brush;8. Polish the ski base with 12 mm merino wool roller.
Content: 25 g (€4,396.00* / 1 kg )
MAPLUS GM Boost Powder Med
€109.90*
Fluor free powder boost for racing. Use for all type of snow, new and transformed, artificial and natural, with snow temperature from -9°C to -2°C. Performancing use with air humidity between 50% and 90%. Use hot application with the waxing iron at 160°C. It’s recommended to overlap GM BOOST on GM BASE Solid or Gel.
1. Spread powder wax evenly on the ski base;2. Melt the wax passing the waxing iron from the tip to the tail at recommended temperature of 160°C; move the iron at a constant speed (nearly 3 cm per second);3. Wait at least few minutes for the ski wax to harden and the ski base to cool down;4. If necessary, remove the excess of melted wax with a sharpened plexy scraper with gentle pressure;5. Free the ski base structure with manual soft brass brush;6. Brush the ski base with manual or roto hard horsehair brush;7. Brush the ski base with manual or roto soft nylon brush;8. Polish the ski base with 12 mm merino wool roller.
Content: 25 g (€4,396.00* / 1 kg )
New
MAPLUS GM Boost Powder Med with Molybdenum
€109.90*
Fluor free powder boost for racing. Use for all type of snow, new and transformed, artificial and natural, with snow temperature from -9°C to -2°C. Performancing use with air humidity between 50% and 90%. Use hot application with the waxing iron at 160°C. It’s recommended to overlap GM BOOST on GM BASE Solid or Gel.
1. Spread powder wax evenly on the ski base;2. Melt the wax passing the waxing iron from the tip to the tail at recommended temperature of 160°C; move the iron at a constant speed (nearly 3 cm per second);3. Wait at least few minutes for the ski wax to harden and the ski base to cool down;4. If necessary, remove the excess of melted wax with a sharpened plexy scraper with gentle pressure;5. Free the ski base structure with manual soft brass brush;6. Brush the ski base with manual or roto hard horsehair brush;7. Brush the ski base with manual or roto soft nylon brush;8. Polish the ski base with 12 mm merino wool roller.
Content: 25 g (€4,396.00* / 1 kg )