SWIX Roto brush nylon
€48.00*
No longer available
T17W Rotobrush nylon, 100mm, is used for polishing after you're done with the plexiscraper and the horsehair brush, removing the wax you have applied on you're skis or snowboards. To attach the rotobrush on a drill, you need a Roto Cover, eg T15-100. Attach the nylon brush on the Roto Cover T15-100 . Then attach Roto Cover with the brush on a drill with a minimum rotation speed of 1500 rpm. Move the brush in overlapping movements from the tip to the back.
Product number:
swix-T0017W
EAN:
2500000770524
Manufacturer product number:
T0017W
Product information "SWIX Roto brush nylon "
T17W Rotobrush nylon, 100mm, is used for polishing after you're done with the plexiscraper and the horsehair brush, removing the wax you have applied on you're skis or snowboards. To attach the rotobrush on a drill, you need a Roto Cover, eg T15-100. Attach the nylon brush on the Roto Cover T15-100 . Then attach Roto Cover with the brush on a drill with a minimum rotation speed of 1500 rpm. Move the brush in overlapping movements from the tip to the back.
Properties "SWIX Roto brush nylon "
| Content: | 100 mm |
|---|---|
| Length: | 100 mm |
Skip product gallery
Empfohlene Produkte
SWIX Roto cork
€40.00*
High quality cork for Cera F application of Powder, Solid and Liquid. 100 mm wide.
SWIX Roto brush horsehair
€52.00*
T16M Rotobrush horsehair, 100mm, is used for polishing after you're done with the plexiscraper, removing the wax you have applied on you're skis or snowboards. To attach the rotobrush on a drill, you need a Roto Cover, eg T15-100. Attach the horsehair brush on the Roto Cover T15-100 . Then attach Roto Cover with the brush on a drill with a minimum rotation speed of 1500 rpm. Move the brush in overlapping movements from the tip to the back.
SWIX Roto brush steel
€136.00*
T19S Rotobrush steel, 100mm, is a fine wire brush used to clean and open the coating structure prior to wax application. Can also be easily used as a second brush after a horsehair brush. Before first use we recommend you dull the steel brush using sandpaper #100. To attach the rotobrush on a drill, you need a Roto Cover, eg T15-100. Attach the steel brush on the Roto Cover T15-100 . Then attach Roto Cover with the brush on a drill with a minimum rotation speed of 1500 rpm. Move the brush in overlapping movements from the tip to the back.