
MAPLUS GM Base Cold
From
€40.00*
Fluor free solid base for racing. Use for all type of snow, new and transformed, artificial and natural, with snow temperature from -22°C to -8°C. Performancing use with air humidity between 30% and 80%. Use hot application with the waxing iron at 150°C. With GM Base Gel, it’s the best choice as a base to overlap GM Boost Powder or Liquid.
HOW TO USE
HOT APPLICATION WITH WAXING IRON1. Let the
wax block drop on 20 cm of the ski base putting it in contact with the waxing
iron base at the recommended
temperature
for each kind of product and melt the wax immediately spreading it with a
regular backward and forward
movement
(from tip to tail);
2. Repeat
the same procedure on all the ski base, then carry out a final passage from the
tip to the tail (nearly 4/5 cm per
second for
GM Base Cold and Med, nearly 3 cm per second for GM BASE Hot);
3. (mix
with hardener) If snow conditions should require a harder base, over the GM
BASE layer just hardened, place some
ARTIC BASE
powder (higher will be the snow abrasion, bigger will be the quantity of
powder) and carry out a slow passage (nearly 3 cm per second) with the waxing iron at 150°C. melting perfectly
the powder inside the solid wax;
4. Free the
ski & edge side from the hardened wax with a plexy scraper;
5. Wait at
least 15 minutes for the ski wax to harden and the ski base to cool down, then
remove the wax in excess with a
sharpened
plexy scraper with gentle pressure;
6. Free the
ski base structure with manual hard steel brush;
7. Brush
the ski base with manual or roto hard brass brush;
8. Brush
the ski base with manual or roto hard horsehair brush;
9. Polish
the ski base with manual or roto soft nylon brush.
MAPLUS GM Base Hot
€40.00*
Fluor free solid base for racing. Use for moist, polished and/or icy compact and mixed artificial snow, with snow temperature from -3°C to 0°C. Performancing use with air humidity between 50% and 100%. Use hot application with the waxing iron at 140°C. With GM Base Gel, it’s the best choice as a base to overlap GM Boost Powder or Liquid.HOW TO
USE HOT APPLICATION WITH WAXING IRON
1. Let the
wax block drop on 20 cm of the ski base putting it in contact with the waxing
iron base at the recommended
temperature
for each kind of product and melt the wax immediately spreading it with a
regular backward and forward
movement
(from tip to tail);
2. Repeat
the same procedure on all the ski base, then carry out a final passage from the
tip to the tail (nearly 4/5 cm per
second for
GM Base Cold and Med, nearly 3 cm per second for GM BASE Hot);
3. (mix
with hardener) If snow conditions should require a harder base, over the GM
BASE layer just hardened, place some
ARTIC BASE
powder (higher will be the snow abrasion, bigger will be the quantity of
powder) and carry out a slow passage
(nearly 3 cm per second) with the waxing iron at 150°C. melting perfectly
the powder inside the solid wax;
4. Free the
ski & edge side from the hardened wax with a plexy scraper;
5. Wait at
least 15 minutes for the ski wax to harden and the ski base to cool down, then
remove the wax in excess with a
sharpened
plexy scraper with gentle pressure;
6. Free the
ski base structure with manual hard steel brush;
7. Brush
the ski base with manual or roto hard brass brush;
8. Brush
the ski base with manual or roto hard horsehair brush;
9. Polish
the ski base with manual or roto soft nylon brush.
MAPLUS GM Base Med
€70.00*
Fluor free solid base for racing. Use for all type of snow, new and transformed, artificial and natural, with snow temperature from -9°C to -2°C. Performancing use with air humidity between 40% and 90%. Use hot application with the waxing iron at 150°C. With GM Base Gel, it’s the best choice as a base to overlap GM Boost Powder or Liquid.HOW TO
USE HOT APPLICATION WITH WAXING IRON
1. Let the
wax block drop on 20 cm of the ski base putting it in contact with the waxing
iron base at the recommended
temperature
for each kind of product and melt the wax immediately spreading it with a
regular backward and forward
movement
(from tip to tail);
2. Repeat
the same procedure on all the ski base, then carry out a final passage from the
tip to the tail (nearly 4/5 cm per
second for
GM Base Cold and Med, nearly 3 cm per second for GM BASE Hot);
3. (mix
with hardener) If snow conditions should require a harder base, over the GM
BASE layer just hardened, place some
ARTIC BASE
powder (higher will be the snow abrasion, bigger will be the quantity of
powder) and carry out a slow passage (nearly 3 cm per second) with the waxing iron at 150°C. melting perfectly
the powder inside the solid wax;
4. Free the
ski & edge side from the hardened wax with a plexy scraper;
5. Wait at
least 15 minutes for the ski wax to harden and the ski base to cool down, then
remove the wax in excess with a
sharpened
plexy scraper with gentle pressure;
6. Free the
ski base structure with manual hard steel brush;
7. Brush
the ski base with manual or roto hard brass brush;
8. Brush
the ski base with manual or roto hard horsehair brush;
9. Polish
the ski base with manual or roto soft nylon brush.
MAPLUS 140 TANK WITH CROSS-COUNTRY ROLLER (1/2 thick - 1/2 thin layer)
€120.00*
For Hot Box 140.
For application of thin wax layers.
MAPLUS 2nd Cut Pro Chrome File fine 200mm
€39.00*
16 t/cm. Professional hard chrome plated file for fine cut.
For precise edge geometry.
MAPLUS 2nd Cut Pro File fine 200mm no chrome
€22.00*
15 t/cm. Professional non-chromed file. For precise edge geometry.
%
MAPLUS Alpine Back Pack Back Pack
€25.00*
€60.00*
(58.33% saved)
Back pack for skiers.
Elegant design with three side pockets.
%
MAPLUS Anti Ice Spray
€10.00*
€16.00*
(37.5% saved)
Enjoy nordic skiing. Prevents mechanical grip zone from icing. Easy to use.
More efficient due to concentrated formula.
Dedicated for snow shoes, climbing spurs, snow shovels, too.
MAPLUS ARCTIC - POWDER ADDITIVE
€14.80*
-30~-10°C.
Extremely hard paraffine for cold conditions or greater durability.
Also usable as hardener for other waxes.
Iron temperature: 160°C.
MAPLUS ARCTIC BASE
€75.00*
For snow temperatures from -30°C to -10°C. Extremely hard paraffin for cold conditions or to increase abrasion resistance. Also suitable for hardening other waxes by mixing in or layering underneath. Ironing temperature: 160°C.
Variants from €25.00*
MAPLUS Base Brush Brass hard
€18.00*
To brush off before and after waxing.
Very good allround brush for beginners.
120x70 mm
MAPLUS Blockwax Red
€25.00*
Universal training wax <-5°C. Ironing temperature: 130°C bis 140°C.
Variants from €5.00*
MAPLUS Blockwax Red Fluoro
€10.00*
Universal fluorinated training wax <-5°C.Iron temperature: 130°C to 140°C.
MAPLUS Blockwax Yellow
€5.00*
Universal training wax for snow temperatures from 0°C to - 5°C.
Ironing temperature: 110°C to 120°C.