
Filter
–
SWIX Structure roller tool
€120.00*
A high quality structure tool for cross country skis that will help you improve the glide in both skating and classic skiing. A 1mm linear structure roll is included. An arrow shows the correct direction of movement. The structure imprint will disappear after rewaxing with an iron. In cold conditions and new snow, we recommend applying the tool to the base with a light pressure. In warmer conditions and transformed snow, apply more pressure.
SWIX Plastic body for T0424
€40.00*
The plastic body of T0424 structure tool. Only plastic body. No rollers included.
SWIX Roller medium for T0423
€40.00*
0,3 mm V - dry to moist fine snow
0,75 mm ||| - fine to coarse-grained wet snow
0,75 mm V - fine to coarse NOT wet snow
1 mm ||| - coarse wet snow
1 mm und 1 mm /// - cross structure for compact, moist to wet snow, marble.
1mm V - coarse NOT wet snow
1,5 mm und 1,5 mm /// - cross structure for compact, moist to wet snow, marble
SWIX Structure insert for T047G
€80.00*
Replacement and additional structure rollers for the structure tool T047G.
SWIX Structure kit with three rollers
€225.00*
SWIX T0424S structure kit with three structure rollers in a small case.
This set contains: T0424050V, 0.5mm broken V structure: for natural and artificial snow, best for cold conditions from 0 to -10 C°
T0424100G, 1.0mm linear: for cold, new snow, warm to wet conditions
T0424200G, 2.0mm linear: for wet transformed snow
SWIX Structure roll for T0410
€105.00*
0.3 mm broken V: for cold conditions and fine-grained snow. 0.5 mm broken V: for coarse, old and artificial snow. 1.0 mm broken V: for wet and coarse snow.
0.5 mm linear: for cold conditions and fine-grained snow.
0.75 mm linear: for cold and medium conditions and fine-grained snow. Often used in combination with 1.0mm tread right in
cold and fine snow.1.00mm linear: used in a wide range of conditions. For cold snow with low pressure and for wet snow with higher pressure.2.00 mm linear: used for wet and coarse snow.0.5 mm thread left: for cold conditions and fine-grained snow. Often used in combination with 0.5 mm screw right
is often used. 0.5 mm thread right: for cold conditions and fine-grained snow. Often used in combination with 0.5 mm screw left. 1.00 mm thread left: for fine to medium coarse snow, below freezing. Often used in combination with 1.0 and 1.5mm
thread right.1.00 mm thread right: for fine to medium coarse snow, below freezing. Often used in combination with 1.0 and 1.5mm
thread left.1.50 mm thread left: for coarse and wet snow. Often used in combination with 1.0 and 1.5mm thread right.1.50 mm thread right: for coarse and wet snow. Often used in combination with 1.0 and 1.5mm thread left.
Variants from €95.00*
SWIX Structure Tool linear
€40.00*
The structural device. For cutting linear structures. The structure tool is delivered with coarse structure steel insert (1 mm) as standard. The following structure steel inserts are also available: Extra fine 0.33 mm. Fine 0.5 mm. Medium 0.75 mm. Coarse 2.0 mm.
SWIX Struktureinsatz für T0424
€64.00*
Classic:
1.0mm linear: fine-grained new snow, icy surfaces, wet coarse snow, coarse and old snow, artificial snow0.5mm linear broken V: coarse and old snow, artificial snow
2.0mm linear: wet coarse snow
Skating:
1.0mm linear: fine-grained fresh snow, icy surfaces, wet coarse snow, coarse and old snow, artificial snow
0.5mm linear broken V: coarse and old snow, artificial snow, fine-grained new snow, icy surfaces
2.0mm linear: wet coarse snow
%
New
SWIX T0410 WC Adjustable Structure Tool
€640.00*
€800.00*
(20% saved)
Even pressure is very important when structuring a ski base. With the Swix structuring tool, the pressure is adjusted so that it is maintained throughout the entire process. The pressure can be easily adjusted by moving the handle on the side up and down. The set is supplied with 4 different rollers. 1.0mm G, 1.0mm SR, 1.5mm SR and 0.5mm broken V-structure roller. The Swix structure tool gives an even structure and improves glide on both skating and classic skis. In cold fresh snow it is recommended to set the tool at a lower pressure, in warmer conditions and transformed snow we recommend a higher pressure. Made in Norway. Structuring tool with 4 rollersManual structuring toolThe most advanced structuring tool that adjusts the pressure