SWIX Drive shaft
€23.00*
Hexagonal drive shaft.
100 mmm for 100 mm brushes.
140 mm for 140 mm or double (70/70 mm) brushes.
210 mm for mounting two brushes, each 100 mm.
Variants from €18.00*
SWIX Drive shaft with protection cover
€68.00*
Roto handle with hexagonial drive shaft and protection cover that fits 100 mm wide Roto Brushes.
T0014HPS-3: Fitting 100 mm wide roto brushes.
T0015HPS-3: Fitting 140 mm wide roto brushes and double roto brushes 70 mm + 70 mm.
SWIX Drive shaft with protection cover
€80.00*
Roto handle with hexagonial drive shaft and protection cover that fits 100 mm wide Roto Brushes. T0014HPS-3: Fitting 100 mm wide roto brushes. T0015HPS-3: Fitting 140 mm wide roto brushes and double roto brushes 70 mm + 70 mm.
Variants from €68.00*
SWIX Protection cover for roto brush 100 mm
€16.00*
Protective cover for Rotobrushes, 100 mm. Mandatory for work with rotor brushes especially steel or bronze brushes. In addition wear glasses at work.
New
SWIX Racing Lock for Roto Cover
€20.00*
Elevate your waxing setup with our Racing Twist Lock for Roto Cover. Designed for better ergonomics, it's a quick and easy upgrade that fits seamlessly with Swix's snaplock suction system (T15-SNAP). Shift effortlessly between the roto cover and iron frame.
New
SWIX Racing Roto Fleece XC, 70mm
€56.00*
Racing Roto Fleece XC, 70mm, is used for cross country skis. You use the fleece brush for improving the performance when using liquid glide waxes. At first spray the liquid wax onto a felt cork and then apply a thin layer to the ski. Leave to dry for 10 minutes. Then remove the excess wax with the Rotofleece.
Two of the 70 mm brushes can be attached to the 140 mm Roto Cover handle, e.g. T15-140. Then attach the Roto Cover with the brushes to the drill. It is recommended to use a drill with a minimum speed of 1800 rpm for best results. The brush is moved in overlapping movements from the top to the end of the ski.
New
SWIX Racing Roto Horsehair XC, 70mm
€40.00*
Racing Roto Horsehair XC, 70mm, is used for cross country skis. It's the second step of polishing when waxing. You use the roto horsehair brush after you're done with the steel brush. Two of the 70 mm brushes can be attached to the 140 mm Roto Cover handle, e.g. T15-140. Then attach the Roto Cover with the brushes to the drill. It is recommended to use a drill with a minimum speed of 1800 rpm for best results. The brush is moved in overlapping movements from the top to the end of the ski.
New
SWIX Racing Roto Nylon XC, 70mm
€40.00*
Racing Roto Nylon XC, 70mm, is used for cross country skis. It's the final step when waxing. You use the roto nylon brush for final polishing all glide waxes and liquids. Two of the 70 mm brushes can be attached to the 140 mm Roto Cover handle, e.g. T15-140. Then attach the Roto Cover with the brushes to the drill. It is recommended to use a drill with a minimum speed of 1800 rpm for best results. The brush is moved in overlapping movements from the top to the end of the ski.
New
SWIX Racing Roto Steel XC, 70mm
€144.00*
Racing Roto Steel XC, 70mm, is used for cross country skis. You use the steel brush for deep cleaning of the base before wax application. Two of the 70 mm brushes can be attached to the 140 mm Roto Cover handle, e.g. T15-140.
Then attach the Roto Cover with the brushes to the drill. It is recommended to use a drill with a minimum speed of 1800 rpm for best results. The brush is moved in overlapping movements from the top to the end of the ski.
SWIX Roto brush horsehair
€52.00*
T16M Rotobrush horsehair, 100mm, is used for polishing after you're done with the plexiscraper, removing the wax you have applied on you're skis or snowboards. To attach the rotobrush on a drill, you need a Roto Cover, eg T15-100. Attach the horsehair brush on the Roto Cover T15-100 . Then attach Roto Cover with the brush on a drill with a minimum rotation speed of 1500 rpm. Move the brush in overlapping movements from the tip to the back.
SWIX Roto brush horsehair nylon soft
€75.00*
Combi brush: Roto Brush Horsehair 70mm & Fine Nylon 70mm. For brushing and polishing of race waxes and Cera F.
SWIX Roto Brush Merino Wool, 100mm
€80.00*
A revolutionary new way to apply glide wax that doesn't require the use of a waxing iron. The method is specially suited for harder waxes like our TST series and is applied in two simple steps: 1. Start by applying the wax to the Roto brush. This is done by touching the rotating wool brush with the wax for a few seconds. The recommended speed of the drill is approximately. 1500 RPM. 2. Apply the Roto brush to the ski base using light pressure (approximately 1500 RPM), working with back and forth motions from the tip of the ski all the way to the back. Repeat these steps twice.
SWIX Roto brush nylon
€52.00*
T17W Rotobrush nylon, 100mm, is used for polishing after you're done with the plexiscraper and the horsehair brush, removing the wax you have applied on you're skis or snowboards. To attach the rotobrush on a drill, you need a Roto Cover, eg T15-100. Attach the nylon brush on the Roto Cover T15-100 . Then attach Roto Cover with the brush on a drill with a minimum rotation speed of 1500 rpm. Move the brush in overlapping movements from the tip to the back.
SWIX Roto brush steel
€150.00*
T19S Rotobrush steel, 100mm, is a fine wire brush used to clean and open the coating structure prior to wax application. Can also be easily used as a second brush after a horsehair brush. Before first use we recommend you dull the steel brush using sandpaper #100. To attach the rotobrush on a drill, you need a Roto Cover, eg T15-100. Attach the steel brush on the Roto Cover T15-100 . Then attach Roto Cover with the brush on a drill with a minimum rotation speed of 1500 rpm. Move the brush in overlapping movements from the tip to the back.
SWIX Roto cork
€40.00*
High quality cork for Cera F application of Powder, Solid and Liquid. 100 mm wide.
SWIX Roto Cover w/Suction, 100mm
€76.00*
Roto cover with driveshaft and air suction functionality. Fits 100 mm brushes.An ergonomic roto handle with driveshaft and protective cover, that fits SWIX' 140 mm roto brushes. The air suction functionality is a great add-on to take care of the working environment in the waxing cabin. When connected to vacuum it remove close to 100 % of the small dust particles created by roto brushing. Highly recommendable for serious waxers. PS: L-bend twist-lock adapter sold separately.
SWIX Roto Cover w/Suction, 140mm
€80.00*
Roto cover with driveshaft and air suction functionality. Fits 140 mm brushes.An ergonomic roto handle with driveshaft and protective cover, that fits SWIX' 140 mm roto brushes. The air suction functionality is a great add-on to take care of the working environment in the waxing cabin. When connected to vacuum it remove close to 100 % of the small dust particles created by roto brushing. Highly recommendable for serious waxers. PS: L-bend twist-lock adapter sold separately.
SWIX Roto fleece
€65.00*
T18F-2 Roto fleece, 100mm, is recommended to use to apply our TS liquid gliders. You spray the liquid glider on your ski and/or snowboard. Use a filt cork to spread out a thin layer. Let it dry for 10 minutes. Then you use the T18F-2 Roto fleece to remove exxess liquid glider. To attach the rotobrush on a drill, you need a Roto Cover, eg T15-100. Attach the fleece brush on the Roto Cover T15-100 . Then attach Roto Cover with the brush on a drill with a minimum rotation speed of 1500 rpm. Move the brush in overlapping movements from the tip to the back.
New
SWIX T12PS-3 Cover for Rotobrush, 100mm
€16.00*
Protective cover for rotor brush. For holder, 100 mm.
New
SWIX T14HN-3 Rotohandle
€48.00*
Handle for rotor brushes. With two ball bearings for better stability.
Fits all Swix hexagonal drive shafts.