Free shipping from 100,- € to DE & AT
Shipping within 24h
Over 10 years of experience
Prepayment -3% discount
Go to homepage Go to homepage
Shopping cart €0.00*

Racing Finish 


Filter products

HOLMENKOL Syntec FF1 Liquid BLU
HOLMENKOL Syntec FF1 Liquid BLU
HOLMENKOL Syntec FF1 Liquid Blue is a fluorine-free high-performance finishing liquid wax. Fulfils all regulations of the international ski associations. For fine to coarse and aggressive snow. For snow temperatures from -12° to -20°C. Increases speed and acceleration. Quick and easy application before the competition.

Content: 50 ml (€2,399.00* / 1 l )

€119.95*
HOLMENKOL Syntec FF1 Liquid RED
HOLMENKOL Syntec FF1 Liquid RED
HOLMENKOL Syntec FF1 Liquid Red is a fluorine-free high-performance finishing liquid wax. Fulfils all regulations of the international ski associations. For fine to coarse and wet snow. For snow temperatures from -6° to -12°C. Increases speed and acceleration. Quick and easy application before the competition.

Content: 50 ml (€2,399.00* / 1 l )

€119.95*
HOLMENKOL Syntec FF1 Liquid YLW
HOLMENKOL Syntec FF1 Liquid YLW
HOLMENKOL Syntec FF1 Liquid Yellow is a fluorine-free high-performance finishing liquid wax. Fulfils all regulations of the international ski associations. Increases speed and acceleration. Quick and easy application before the competition. For fine to coarse and wet snow. For snow temperatures from 0° to -6°C.

Content: 50 g (€2,399.00* / 1 kg )

€119.95*
Details
HOLMENKOL Syntec FF1 Powder BLU
HOLMENKOL Syntec FF1 Powder BLU
HOLMENKOL Syntec FF1 Powder Blue is a fluorine-free high-performance finishing powder. Fulfils all regulations of the international ski associations. Increases speed and acceleration. Very high abrasion resistance even over long distances. High dirt repellence. For fine to coarse and aggressive snow. For snow temperatures from -10° to -20°C. Ironing temperature 150° - 160°C.

Content: 30 g (€4,665.00* / 1 kg )

€139.95*
HOLMENKOL Syntec FF1 Powder RED
HOLMENKOL Syntec FF1 Powder RED
HOLMENKOL Syntec FF1 Powder Red is a fluorine-free high-performance finishing powder. Fulfils all regulations of the international ski associations. Increases speed and acceleration. Very high abrasion resistance even over long distances. High dirt repellence. For fine to coarse and wet snow. For snow temperatures from -4° to -12°C. Ironing temperature 150° - 160°C.

Content: 30 g (€4,665.00* / 1 kg )

€139.95*
HOLMENKOL Syntec FF1 Powder YLW
HOLMENKOL Syntec FF1 Powder YLW
HOLMENKOL Syntec FF1 Powder Yellow is a fluorine-free high-performance finishing powder. Fulfils all regulations of the international ski associations. Increases speed and acceleration. Very high abrasion resistance even over long distances. High dirt repellence. For fine to coarse and wet snow. For snow temperatures from 0° to -4°C. Ironing temperature 150° - 160°C.

Content: 30 g (€4,665.00* / 1 kg )

€139.95*
HWK Highspeed Powder VP 712-W
HWK Highspeed Powder VP 712-W
Highspeed Powder VP 712-W is another alternative to FP Warm. The VP 712-W has its strengths in over-frozen damp to wet snow. It has proven to be an insider’s tip in recent seasons, especially in wet icy conditions and whenever the race tracks are treated with salt. Alternative to FP Warm. Adapt base wax to snow conditions. Temperature range: +15°C to -2°C Ironing temperature: approx. 180°C Processing instructions for Powder VP 712-W: ALPIN: Spread HWK powder on the base-prepared, race-ready ski. veneering or corking (hand or rotor cork approx. 1000 rpm) or lightly melt and then vlies or cork in then brush out and polish In very aggressive and wet conditions (alpine speed range) also iron.  NORDIC: Spread HWK powder on base-prepared, race-ready skis. iron in (approx. 5 sec over ski length) vialing or corking at approx. 1000 rpm Cool for 15min, brush out and polish

Content: 30 g (€4,866.67* / 1 kg )

€146.00*
Details
HWK Highspeed Powder VP S587
HWK Highspeed Powder VP S587
This wax has presented itself as a "MUST HAVE" in the wax box in the World Cup, but also at many ski marathons, especially due to its wide range of use. It is suitable for all types of snow in the specified temperature range, which means you always have an advantage over the competition in changing conditions. VP S587 also proved to be extremely abrasion-resistant, making it ideal for ski marathons. The VP S587 has particularly good gliding properties in new wet marble snow. Alternative to FP Middle. Adapt the base wax to the snow conditions.ALPIN: Spread HWK powder on the base-prepared, race-ready ski. veneering or corking (hand or rotor cork approx. 1000 rpm) or lightly melt and then vlies or cork in then brush out and polish In very aggressive and wet conditions (alpine speed range) also iron. NORDIC: Spread HWK powder on base-prepared, race-ready skis. iron in (approx. 5 sec over ski length) vialing or corking at approx. 1000 rpm Cool for 15min, brush out and polish

Content: 30 g (€4,866.67* / 1 kg )

€146.00*
Details
HWK Highspeed Powder VP S600
HWK Highspeed Powder VP S600
Highspeed Powder VP S600 is ideal for all dry to slightly damp conditions. This wax played a significant role in top placings not only at the Olympics but also in numerous other World Cup races. Positioning between FP Cold and FP Middle. Adapt base wax to snow conditions. Temperature range: -2°C to -16°C Ironing temperature: approx. 180°C Processing instructions for Powder VP S600: ALPIN: Spread HWK powder on the base-prepared, race-ready ski. veneering or corking (hand or rotor cork approx. 1000 rpm) or lightly melt and then vlies or cork in then brush out and polish In very aggressive and wet conditions (alpine speed range) also iron.  NORDIC: Spread HWK powder on base-prepared, race-ready skis. iron in (approx. 5 sec over ski length) vialing or corking at approx. 1000 rpm Cool for 15min, brush out and polish

Content: 30 g (€4,866.67* / 1 kg )

€146.00*
Details
HWK Highspeed Powder VP S800
HWK Highspeed Powder VP S800
Highspeed Powder VP S800 is ideal for very wet snow and sleet. VP S800 Fluor Powder is a world cup proven fluor powder specially developed for wet fresh snow, sleet or other extremely wet snow types. Alternative to FP Warm. Adapt base wax to snow conditions.Temperature range: +15°C to -2°CIroning temperature: approx. 180°CProcessing instructions for Powder VP S800:ALPIN: Spread HWK powder on the base-prepared, race-ready ski. veneering or corking (hand or rotor cork approx. 1000 rpm) or lightly melt and then vlies or cork in then brush out and polish In very aggressive and wet conditions (alpine speed range) also iron. NORDIC: Spread HWK powder on base-prepared, race-ready skis. iron in (approx. 5 sec over ski length) vialing or corking at approx. 1000 rpm Cool for 15min, brush out and polish

Content: 30 g (€4,866.67* / 1 kg )

€146.00*
Details
New
HWK Hydro Cold
HWK Hydro Cold
Hydro Cold is suitable for all cold and dry snow conditions at a temperature of -8°C to -25°C. Always shake well before use!  The HYDRO liquid wax line from HWK Ski Wax is the cheaper alternative to LIQUO liquid waxes. The HYDRO line is therefore particularly suitable for hobby and junior sports and also has very good gliding properties. HYDRO waxes are categorised identically to the LIQUO line into the WARM, MIDDLE and COLD ranges. Processing instructions for Hydro Cold: Either on the ski prepared with basic racing wax or on the ski prepared ready to race with basic racing wax and fluor wax (corked, brushed and polished). Apply Hydro Wax to the entire surface or spray on, allow to dry and work in very lightly with a hand fleece or nylon stocking if necessary. Then polish with a hand brush (nylon blue)!

Content: 50 ml (€920.00* / 1 l )

€46.00*
Details
New
HWK Hydro Middle
HWK Hydro Middle
Hydro MIDDLE is suitable for all wet snow conditions, at a temperature from -2°C to -10°C. Always shake well before use! Temperature range: -2°C to -10°C The HYDRO liquid wax line from HWK Ski wax is the cheaper alternative to the LIQUO liquid waxes. The HYDRO line is therefore particularly suitable for hobby and junior sports and also brings very good gliding properties. The classification of HYDRO waxes is identical to the LIQUO line in the WARM, MIDDLE and COLD ranges. Processing instructions for Hydro MIDDLE: Either on the ski primed with basic racing wax or on the ski prepared ready for racing (corked, brushed and polished) with basic racing wax and fluorine wax. Apply Hydro Waxes over the entire surface or spray on and allow to dry. If necessary, work in very lightly with a hand fleece or nylon stocking. Then polish with hand brush (nylon blue)!

Content: 50 ml (€920.00* / 1 l )

€46.00*
Details
New
HWK Hydro Warm
HWK Hydro Warm
Hydro Warm is suitable for damp to very wet snow conditions at a temperature of +10°C to -4°C. Always shake well before use! Temperature range: +10°C to -4°C. The HYDRO liquid wax line from HWK Ski Wax is the cheaper alternative to LIQUO liquid waxes. The HYDRO line is therefore particularly suitable for hobby and junior sports and also has very good gliding properties. The HYDRO waxes are categorised in the same way as the LIQUO line into the WARM, MIDDLE and COLD ranges. Processing instructions for Hydro Warm: Either on the ski prepared with basic racing wax or on the ski prepared ready to race with basic racing wax and fluor wax (corked, brushed and polished). Apply Hydro Wax to the entire surface or spray on, allow to dry and work in very lightly with a hand fleece or nylon stocking if necessary. Then polish with a hand brush (nylon blue)!

Content: 50 ml (€920.00* / 1 l )

€46.00*
Details
New
HWK UHX Block Cold
HWK UHX Block Cold
UHX-Block Cold is a fluorine-free finishing wax for dry to wet snow. Temperature range: -5°C to -15°C Processing: Rubbing with Merino Wool (RB6) Processing instructions for UHX-Block Cold:Rub the wax onto the Merino Wool and then rub it onto the race-ready ski with the Roto-Roller (2x from the tip to the tail of the ski). Then polish again with the clean Merino Wool (2x from the ski tip to the ski end).

Content: 25 g (€3,000.00* / 1 kg )

€75.00*
Details
New
HWK UHX Block Middle
HWK UHX Block Middle
UHX-Block Middle is a fluorine-free finishing wax for dry to wet snow. Temperature range: -6°C to +2°C Processing: Rubbing with Merino Wool (RB6) Processing instructions for UHX-Block Middle:Rub the wax onto the Merino Wool and then rub it onto the race-ready ski with the Roto-Roller (2x from the tip to the tail of the ski). Then polish again with the clean Merino Wool (2x from the ski tip to the ski end).

Content: 25 g (€3,000.00* / 1 kg )

€75.00*
Details
New
HWK UHX Block Middle Black
HWK UHX Block Middle Black
UHX Block Middle Black is a fluorine-free finishing wax for fine dry to moist snow. Temperature range: -10°C to 0°C Processing: Rub on with Merino Wool (RB6) Processing instructions for UHX Block Middle Black:  Hold the wax block against the rotating Merino Wool. Rub with the roller onto the ski base prepared for racing (2x from ski tip to ski tail). Then polish with a clean Merino Wool (2x from the tip to the tail of the ski).

Content: 25 g (€3,200.00* / 1 kg )

€80.00*
Details
New
HWK UHX Block Warm
HWK UHX Block Warm
UHX-Block Warm is a fluorine-free finishing wax for damp to wet snow. Temperature range: 0°C to +8°C Processing: Rubbing with Merino Wool (RB6) Processing instructions for UHX-Block Warm:Rub the wax onto the Merino Wool and then rub it onto the race-ready ski with the Roto-Roller (2x from the tip to the tail of the ski). Then polish again with the clean Merino Wool (2x from the ski tip to the ski end).

Content: 25 g (€3,000.00* / 1 kg )

€75.00*
Details
MAPLUS FP4 HOT Powder
MAPLUS FP4 HOT Powder
Perfluorinated wax for application on fluorinated paraffin waxes for racing use. Particularly effective in medium humidity (50% - 80%), in temperatures from 0°C to -3°C and in aggressive snow mixed with artificial snow. Ironing temperature: 160°C.

Content: 30 g (€4,300.00* / 1 kg )

€129.00*
Details
MAPLUS FP4 HOT Solid
MAPLUS FP4 HOT Solid
Racing Finish for wet conditions 0~-3°C.

Content: 20 g (€5,129.50* / 1 kg )

€102.59*
Details
New
MAPLUS XCELERATE PRO POWDER COLD
MAPLUS XCELERATE PRO POWDER COLD
100% fluor-free FIS and IBU approved. Latest generation cold-applied top finish powders, incredibly easy to apply and extremly performant. Maximum acceleration and abrasion resistance. Snow temperature: -12 / -22 °C For all types of snow Air Humidity: > 40% 

Content: 10 g (€12,490.00* / 1 kg )

€124.90*
Details
New
MAPLUS XCELERATE PRO POWDER HOT
MAPLUS XCELERATE PRO POWDER HOT
100% fluor-free FIS and IBU approved. Latest generation cold-applied top finish powders, incredibly easy to apply and extremly performant. Maximum acceleration and abrasion resistance. Snow temperature: 0 / -5 °C For all types of snow Air Humidity: > 40% 

Content: 10 g (€12,490.00* / 1 kg )

€124.90*
Details
New
MAPLUS XCELERATE PRO POWDER MED
MAPLUS XCELERATE PRO POWDER MED
100% fluor-free FIS and IBU approved. Latest generation cold-applied top finish powders, incredibly easy to apply and extremly performant. Maximum acceleration and abrasion resistance.Snow temperature: -6 / -12 °C For all types of snow Air Humidity: > 40% 

Content: 10 g (€12,490.00* / 1 kg )

€124.90*
Details
New
MAPLUS XLP 4.0 Extra Long Lasting Powder
MAPLUS XLP 4.0 Extra Long Lasting Powder
Powder accelerator for competition. Use with any type of artificial snow and natural snow from new moist to old transformed, icy and wet with temperatures from - 7° to 0°C and relative air humidity over 50%. Recommended hot application with waxing iron at 160°C.

Content: 30 g (€3,833.33* / 1 kg )

€115.00*
Details
New
MAPLUS XLP 6.0 Extra Long Lasting Powder
MAPLUS XLP 6.0 Extra Long Lasting Powder
Power accelerator for competition. Use with any type of artificial snow and natural snow from powder to transformed compact and icy with temperatures from - 15° to - 6°C and relative air humidity over 40%. Recommended hot application with waxing iron at 160°C.

Content: 0.3 g (€383,333.33* / 1 kg )

€115.00*
Details


This website uses cookies to ensure the best experience possible. More information...